You’re looking at $1,032 to $2,113 total for a new range installation nationally. That’s the full bill: the appliance, labor, supplies, and the old one hauled off. The range itself eats up most of that—between $687 and $1,584—so the actual installation work is a much smaller slice.
What Drives the Price
The big variable is gas versus electric. A gas range needs a licensed plumber (or gas fitter) to connect the line, pull a permit, and test for leaks. That’s usually two trips: one to disconnect the old stove, another to install the new one. Electric ranges are simpler—just plug into an existing 240V outlet—but if you don’t have the right circuit, you’re calling an electrician.
Here’s the national breakdown for the labor and extras:
- Basic installation labor: $181–$298. This covers hooking up the stove, leveling it, and testing it.
- Job supplies: $12–$15 (pipe dope, gas-rated flex line, Teflon tape).
- Old appliance removal: $80–$131.
- Debris disposal: $71–$85.
The sticker shock people hit? It’s rarely the labor rate. It’s the permit fee, the “trip charge” for the plumber to come twice, and the fact that big box stores often outsource to third-party contractors who tack on their own overhead.
How Much City-to-City
Location matters a lot. A range install in Austin, TX will run you $975–$2,011. In New York City, you’re looking at $1,202–$2,420. The spread isn’t just about cost of living—it’s also about how hard it is to get a licensed pro to show up. Here’s a taste of that spread:
| City | Typical Range |
|---|---|
| New York, NY | $1,202–$2,420 |
| San Francisco, CA | $1,164–$2,351 |
| Seattle, WA | $1,145–$2,317 |
| Boston, MA | $1,126–$2,283 |
| Chicago, IL | $1,126–$2,283 |
| Denver, CO | $1,013–$2,079 |
| Atlanta, GA | $994–$2,045 |
| Houston, TX | $987–$2,031 |
| Miami, FL | $983–$2,024 |
| Austin, TX | $975–$2,011 |
Notice that the low end in Austin is actually lower than the national average? That’s because you can often find a small shop that’ll do a basic electric hookup for $150–$200. The high end in NYC? That’s the premium for a licensed plumber who carries a $1 million umbrella policy (required by many co-ops and condos).
What Homeowners Actually Pay
Real people report paying between $200 and $500 just for the labor and permit on a gas stove install, depending on where they live. In Somerville, MA, a plumber quoted $250–$300 for a hookup (after the stove was delivered). In New York City, a Redditor paid $299 through PC Richard. Another in Massachusetts paid $500 for a plumber to make two trips and pull a permit—and most commenters said that was a fair price.
The gotcha? Big box stores like Home Depot and Lowe’s charge around $199 for gas stove installation, but they don’t do it themselves. They contract it out. One homeowner in r/HomeImprovement said Lowe’s quoted $199 for hookup, but the total with new lines, haul-away, and tax came to $800 before they even scheduled the install. Another in Massachusetts found out that the big boxes only deliver and haul away—they won’t touch the gas line. You have to find your own plumber.
And if you’re switching from gas to electric? You’ll need an electrician to run a new 240V circuit. That’s $800–$1,200 for the wire and breaker if you have room in your panel, plus another $150–$200 for a plumber to cap the gas line. One homeowner in r/HomeImprovement reported paying $800 for 8/3 wire and a 40-amp breaker, then $150 for the gas line cap.
How to Save Money
- Do the disconnect yourself. If you’re comfortable shutting off the gas valve and removing the old stove, you save one trip. Have the pro come only for the install.
- Buy from Costco. Their installation is often free (or heavily subsidized) with the purchase, and haul-away is included. The $60 membership pays for itself on one install.
- Get three quotes. Don’t take the first number. Call a small local plumbing shop, a gas fitter, and the big box store’s contractor.
- Check if your building has a maintenance guy. In co-ops and condos, the super may be licensed to do gas work for a small fee. One New Yorker said their building guy charged less than $100.
- Skip the permit if it’s a direct swap. Some municipalities don’t require a permit for a like-for-like gas stove replacement. Ask your local building department first.
FAQ: Real Questions, Straight Answers
Do I need an electrician to install a stove?
Only if you’re switching from gas to electric and need a new 240V circuit. For a plug-in electric range on an existing outlet, no.
Will Best Buy install a gas range?
Best Buy offers installation through their Geek Squad or third-party contractors, but it’s not universal. Call your local store. They typically charge $199–$299 for gas hookup.
Does Lowe’s install stoves?
Yes, but it’s subcontracted. Expect around $199 for gas hookup, plus fees for lines and haul-away. Read the fine print—the total isn’t always clear up front.
Do you need a professional to install a stove?
For gas, yes. Most states require a licensed plumber or gas fitter to connect gas lines. For electric, you can do it yourself if you’re comfortable with a 240V plug and leveling the unit. But if anything goes wrong, insurance won’t cover it.
Will Home Depot install my stove?
Yes, but same deal as Lowe’s. They contract out. Installation costs $199–$299 for gas. Electric is usually $99–$149.
How much does a range installation cost near me?
Check the city table above. If your city isn’t listed, use the national range as a rough guide, then add or subtract 10–20% based on your local cost of living.
These are reference ranges, not a firm quote. Get three in-person estimates before you commit.