So, how much does it cost to put a door on your garage? If you’re after a straight answer: expect to pay between $969 and $1,573 per door for a basic installation nationwide. That includes the door itself, labor, and the small supplies needed to get it hung. But as anyone who’s gotten a quote this year can tell you, that range gets stretched in all directions depending on where you live, what you’re buying, and who’s installing it.
Let’s break down what actually drives the price, city by city, so you know if you’re getting a fair shake.
What You’re Actually Paying For
The national cost splits into three pieces:
- Garage Door Cost: $730–$1,102. This is the big chunk. A basic, non-insulated steel door costs less. Add insulation, windows, or a wood finish, and that number climbs fast.
- Garage Door Installation Labor, Basic: $202–$430. That’s the pro’s time to remove your old door, hang the new one, adjust the springs, and make sure everything tracks right.
- Garage Door Installation Job Supplies: $36–$41. Brackets, bolts, weatherstripping — the small stuff that keeps it from falling off.
So a fair baseline for a simple single-car door, installed, is roughly $1,000 to $1,600. But again, that’s the national average. Your zip code changes everything.
How Much It Costs in Your City
Labor rates and local markups vary wildly. Here’s what you’ll pay in major metros, based on real data:
| City | Typical Range (per door) |
|---|---|
| New York, NY | $1,112–$1,844 |
| San Jose, CA | $1,080–$1,783 |
| San Francisco, CA | $1,080–$1,783 |
| Seattle, WA | $1,064–$1,753 |
| Chicago, IL | $1,048–$1,723 |
| Boston, MA | $1,048–$1,723 |
| Los Angeles, CA | $1,032–$1,693 |
| Philadelphia, PA | $1,017–$1,663 |
| San Diego, CA | $1,017–$1,663 |
| Minneapolis, MN | $1,017–$1,663 |
| Columbus, OH | $959–$1,555 |
| Phoenix, AZ | $953–$1,543 |
| Denver, CO | $953–$1,543 |
| Atlanta, GA | $937–$1,513 |
| Houston, TX | $931–$1,501 |
| Dallas, TX | $931–$1,501 |
| Jacksonville, FL | $928–$1,495 |
| Miami, FL | $928–$1,495 |
| San Antonio, TX | $925–$1,489 |
| Austin, TX | $921–$1,483 |
Notice the spread. A basic install in Austin or San Antonio might run you $925. The same door in New York City could be $1,800. That’s not because the door itself costs twice as much — it’s labor, overhead, and the fact that a garage door company in Manhattan has different rent than one in Texas.
What Homeowners Are Actually Paying (and the Gotchas)
The Reddit threads tell a familiar story: quotes vary a lot, and the cheapest option isn’t always the best.
One homeowner in San Diego got quoted $3,000 for a steel 16’x7’ non-insulated door with a new opener, frame, and removal. That’s on the high side for the area, but not unreasonable given California labor costs. Another in the Bay Area paid $3,500 for a two-car insulated door with a LiftMaster opener — and felt that was fair.
On the other end, a homeowner in Huntsville, Alabama was quoted $1,600 for a basic 16x7 pan door with all components replaced except the motor. They thought it was high, and commenters agreed — one local who works at Wilson Garage Door said they’d replace both springs for $245, and another got a full insulated two-car door and motor last year for around $1,300 installed.
The big takeaway: get at least three quotes. The same job can range from $900 to $2,100, as one homeowner found. Also, watch out for companies like Precision Door, which multiple Redditors warn are commission-based and tend to quote high. Look for a local company with a brick-and-mortar shop.
How to Save Money and Get a Fair Quote
A few things help you keep costs down:
- Stick with a basic, non-insulated steel door if you’re selling soon or just need function. Insulation can add $200–$400.
- Don’t pay for a new opener unless you need one. If your current opener works, reuse it. A new opener plus installation can run $400–$1,000 depending on the model and your area.
- Expect labor to be about 30% of the total cost. Multiply the door price by 1.3 for a rough estimate, as one installer advised.
- Ask about removal and disposal. Some quotes include it, some add $150–$200.
- If you’re in Texas, the range is $921–$1,501 for a basic install. That’s on the lower end nationally, but prices still vary between Houston, Dallas, San Antonio, and Austin.
FAQ
How much does it cost to put a door on your garage?
Nationally, $969 to $1,573 per door for a basic installation, including the door, labor, and supplies.
What about garage door opener installation cost?
A new opener plus installation typically runs $400 to $1,000, depending on the brand and your area. A high-end LiftMaster with a solid rail can be $1,000–$1,700 installed in pricier cities.
How much does Home Depot garage door installation cost?
Home Depot’s quotes tend to fall in line with the national average, but you’ll often get a better deal from a local company. Their base install starts around $1,200–$1,600 for a basic door.
How much for a single garage door with installation?
A single-car door (8’x7’ or 9’x7’) usually runs $900–$1,500 installed. A basic non-insulated door on the low end, insulated on the high end.
What’s a 1-car garage door replacement cost?
Same as above — $900 to $1,500 for a full replacement, including removal of the old door.
How much does garage door installation cost in Texas?
In Austin, $921–$1,483; in Dallas and Houston, $931–$1,501; in San Antonio, $925–$1,489. Texas is generally cheaper than the coasts.
These are reference ranges based on national averages and city-specific data. Your actual quote depends on your door choice, local labor rates, and the condition of your existing setup. Always get multiple written estimates before signing anything.